Changes between Version 5 and Version 6 of NorbertLimulus


Ignore:
Timestamp:
01/01/08 12:03:00 (16 years ago)
Author:
admin
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • NorbertLimulus

    v5 v6  
     1[[PageOutline(1-2,Page Contents,pullout)]] 
     2 
     3 
    14== Norbert Design == 
    25 
    36Norbert was designed to use totally off-the-shelf parts. There is no custom case work required. Of course the hardware could be placed in a smaller volume with a custom case design, but that would require extra work. The following are more details about Norbert. 
    47 
    5 Norbert bascicaly consista of a head node and three diskless worker nodes. All nodes have an extra PCIe GigE card for compute traffic. The head node has  
     8Norbert basically consists of a head node and three diskless worker nodes. All nodes have an extra PCIe GigE card for compute traffic. The head node has  
    69 
    710== Norbert Pictures == 
    811 
    9 Norbert measures 26 inches (66 cm) accross, 16 (41 cm) inches deep, and 25 (64 cm) inches high. I placed the cases on a inexpensive wire shelf cart so it can be moved easily. 
     12Norbert measures 26 inches (66 cm) across, 16 (41 cm) inches deep, and 25 (64 cm) inches high. I placed the cases on a inexpensive wire shelf cart so it can be moved easily. 
    1013 
    1114The following is a front view. The two GigE switches are on the top. Units can be removed without too much trouble, however, there is little need to take anything off the shelves. The cases have build in temperature sensors (blue lights on the front). The head node is located on the top left (it has a DVD drive). 
    … …  
    1417[[Image(htdocs:limulus-front-500x414.jpg)]] 
    1518 
    16 The following a picture of the back. The two switches can be seen on the top. Of course there is a need for soem cabling clean up (I plan on making custom length cables). There is a powerstrip on bottom middle of the shelf. The single powerstrip cord is the only power connection needed. 
     19The following a picture of the back. The two switches can be seen on the top. Of course there is a need for some cabling clean up (I plan on making custom length cables). There is a powerstrip on bottom middle of the shelf. The single powerstrip cord is the only power connection needed. 
    1720 
    1821[[Image(htdocs:limulus-back-500x375.jpg)]]